Replacing Components; Reminders For Replacing Components; Cleaning The Interior; Main Components - Mareno NIW74TE Instrucciones Para Instalación, Uso Y Mantenimiento

15 Electrical circuit
protection

14 REPLACING COMPONENTS

REMINDERS FOR REPLACING COMPONENTS.

• Disconnect the appliance electric supply , if present, before
carrying out any operation.
• After replacing an electrical system component, check it is
correctly wired.
Replacing the hob inductor element
• Remove the control panel and front.
• Remove the component and disconnect it.
• Replace the faulty component.
Replacing the Wok inductor element
• Remove the control panel and front.
• Disconnect the inductor from the terminal board located on
the generator.
• Remove the inductor, lifting it downwards.
• Replace the faulty component.
Replacing the temperature regulator
• Remove the control panel.
• Replace the faulty component.
Replacing the generator
• Remove the control panel and front.
• Remove the generator and disconnect it.
• Replace the faulty component.
Replacing the glass ceramic hob
• In the event the glass ceramic hob is broken, contact our
company to have it replaced.

15 CLEANING THE INTERIOR

• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.

16 MAIN COMPONENTS

• GLASS CERAMIC HOB
• Glass ceramic induction wok
• Indicator light
• Inductor elements
• Generator
• RFI f lter
22
Empty pan, de- Remove the pan,
fective sensor switch off the ap-
pliance and let
the cooking zone
cool down befo-
re switching on
again. Disconnect
the generator and
reconnect it again
after a few minu-
tes.