Installation Instructions; Unpacking And Removing Shipping Material; Tools You Will Need - KENMORE ELITE 796.3155 Manual De Uso Y Cuidado

UNPACKING AND REMOVING SHIPPING MATERIAL

When removing the washer from the carton base, be
sure the plastic tub support comes off with the base.
If you must lay the washer down to remove the base
packaging materials, always protect the side of the
washer and lay it carefully on its side. DO NOT lay the
washer on its front or back.
Tub support
1. After removing the carton and shipping material,
lift the washer off the foam base. Make sure the
plastic tub support comes off with the base and is
not stuck to the bottom of the washer.
2. Save the foam block for future use. If the washer
must be moved in the future, the foam support
will help prevent damage to the washer during
transportation.
NOTE: To prevent damage, do not remove the foam
block until the washer is at the final location.

INSTALLATION INSTRUCTIONS

Carton Base
8
3. Unfasten the power cord from the back of the
washer.

TOOLS YOU WILL NEED

• Adjustable Pliers
• Carpenter's Level