Control Panel Features; Power (On/Off) Button; How To Use; Cycle Modifier Buttons - KENMORE ELITE 796.3155 Manual De Uso Y Cuidado

WARNING:
To reduce the risk of fire, electric shock, or injury to persons, read and follow this
entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.

CONTROL PANEL FEATURES

A
E

POWER (ON/OFF) BUTTON

A
Press to turn the washer ON. Press again to turn
the washer OFF. Pressing the POWER button dur-
ing a cycle will cancel that cycle and any load
settings will be lost. The lid will unlock after a
brief pause.
NOTE: If the washer remains idle for four minutes
after turning the washer off, any water left in
the tub will automatically be drained. An alarm
will sound one minute prior to draining, and 'dr'
will appear on the display. You may restart the
washer at this time. However, once the washer
initiates draining, all functions will be suspended
and cycle settings lost, and 'dr' will be displayed
until draining is complete.
CYCLE SELECTOR KNOB
B
Turn this knob to select the desired cycle. Once the
desired cycle has been selected, the standard presets
will appear in the display. These settings can be
adjusted using the cycle setting buttons anytime
before starting the cycle.
NOTE: To protect your clothing, not all settings are available on all cycle selections.

HOW TO USE

B

START/PAUSE BUTTON

C
Press this button to start the selected cycle.
If the washer is running, use this button to pause the
cycle without losing the current settings.
NOTE: If you do not press the START/PAUSE button
within four minutes of selecting a cycle, the washer
automatically turns OFF. If the washer is paused
during a cycle for more than 60 minutes, the cycle
will be cancelled and any water remaining in the
tub will be drained. An alarm will sound at three
minutes to warn you that the tub is about to drain.

CYCLE MODIFIER BUTTONS

D
Use these buttons to adjust the settings for the se-
lected cycle. The settings light up above the
buttons to show the current selection.
E
SPECIAL CYCLE AND OPTION BUTTONS
These buttons allow you to select special cycles or
options.
TIME AND STATUS DISPLAY
F
The display shows the cycle status and estimated
time remaining.
12
F
D
C