Tabla de contenido
ssembly Plan
NOTE: There must be a 2-1/8''
Fig. 20
(7) [PF 3881] 1'' X 4'' X 36''
TOP
(2)
2-1/2'' screws
Per joint
NOTE: DO NOT USE THE
PRE-DRILLED HOLES
ON THE TOPS OF THE
BARRIER BOARDS.
SECURE BOARDS INTO
CENTER OF THE
SWING BEAM
SUPPORT BOARD.
2-1/2'' screw
1-1/2'' screw
Nominal Gap between all
barrier boards.
BOTTOM
(2)
1-1/2'' screws
Per joint
Fig. 20b
1/2''
Fig. 20a
Barrier Boards
1. ttach Barrier Boards as shown in (Fig. 20).
2. ttach Barrier Support Boards as shown in (Fig. 20a).
3. Tremont Only: Do not install [PF 3903] as shown in
(Fig. 20b).
30
PB 8208 TREMONT
ONly
[PF 3900] 5/4'' X 4'' X 20-3/4''
FlUSH
(5)
2-1/2'' screws
(3)
2-1/2'' screws
Per joint
Tabla de contenido
