Playcore Swing-N-Slide PB 8316 Windward Instrucciones De Montaje página 25

Tabla de contenido
Fig. 15c
A-FRAME ATTACHES
HERE
Fig. 15a
x4
Loc Nut
Washer
4-1/4''
Swing Hanger
TWO CHILD SWING
MOUNTS HERE
Fig. 15
2"
Fig. 15b
Bolt Cover
Fig. 15d
2''
Carriage Bolt
Two Child Swing Supports:
1. Drill (2) 2'' x 4'' x 20'' supports as indicated in (Fig. 15).
32-1/2''
2. ttach four swing hangers to the supports using 5/16'' flat
washers and loc nuts as shown in (Fig. 15a).
3. Place Bolt Covers over the top of the swing hangers and loc
nuts. Secure to the supports using 2-1/2'' screws per Bolt
Cover, as shown in (Fig. 15b).
4. long top of Swing Beam mark placement for Two Child
Swing Supports as shown in (Fig. 15c).
5. Position four beam brackets (right and left) in position on
14-1/2''
beam making certain the outside of the braces are 18''
apart and the nailing edge of the bracket is flush with the
top of the beam (Fig. 15d). ttach using three 2-1/2''
screws per bracket.
6. Center supports across beam, mark and drill 3/8'' holes
(Fig. 15d).
7. ttach using two 2'' Carriage bolts, 5/16" flat washers
and loc nuts per bracket (Fig. 15d).
25
side view
Drill 3/8" Holes
20"
top view
16"
Loc Nut
Washer
(3)
2-1/2''
screws
per bracket
18"
(2) 2'' x 4'' x 20''
ssembly Plan
(2) 2-1/2'' screws
Tabla de contenido
loading

Este manual también es adecuado para:

Swing-n-slide pb 8208 tremont

Tabla de contenido