Maintenance, Service - Rothenberger 1.4800 Instrucciones De Uso

Pressing
Caution!
The connection preparations can be found in the system-related technical documentation from
the fittings manufacturer and the prerequisites for leak-proof press joints.
Both jaw levers must be actuated for the opening or closing of the jaw. Locate the jaw on the press
fittings according to the instructions of the press fitting manufacturer. Carry out pressing operation
 After completing the pressing operation the jaw must be completely closed at the top as well as
above the connecting strap.
 Maintain visual inspection during the pressing procedure!
After a completed pressing operation the jaw is opened by pressing the jaw lever
Caution!
The nominal width and the pressing contour of the fitting must match the nominal width and
contour of the interchangeable inserts. If this is not true faulty pressings will result. Always
follow the mounting instructions of the fittings manufacturer.
Caution!
There must be no contamination, swarf or suchlike in the pressing contour of the
interchangeable inserts and the fitting. If this is not true faulty pressings will result.
Danger!
Never put fingers or other body parts inside the inner area of the jaw. Risk of injury!

Maintenance, Service

Have your jaw checked at the latest 1 year after the purchase or after 10,000 pressings (according
to which occurs first) by an authorised ROTHENBERGER testing centre, and repeat these checks at
the latest 1 year or another 10,000 pressings after the previous inspection. During jaw inspection
the jaws are checked for operating and functional safety and wear parts (e.g. springs) are
exchanged. Jaws which are functionally and operationally safe are returned to you
Yours sincerely
Your ROTHENBERGER Serviceteam
ROTHENBERGER Werkzeuge GmbH SERVICE –CENTER • Am Hühnerberg 4 • D-65779 Kelkheim
Tel.: +49 (0) 61 95 / 800 - 8200 • Fax: +49 (0) 61 95 / 800 – 7491 • [email protected]
ENGLISH
5