Basic Dvd Operations; Turn On The Power; Select The Source; Load A Dvd - JVC TH-A35 Manual De Instrucciones

Basic DVD Operations

This manual mainly explains operations using the buttons on
the remote control. You can also use the buttons on the center
unit if they have the similar names (or marks) as those on the
remote control.
If operations using the center unit are different from those
using the remote control, they are then explained.
SOUND
TV
CENTER
1
REAR-L
5
TEST CLEAR
9
2
DVD FM/AM
DVD
CONTROL
TV
TV VOL
5
AUDIO VOL
+/–
TOP
MENU
CHOICE
7
7
DOWN - TUNING - UP
AUDIO SUB TITLE ANGLE ZOOM
6
RETURN DIMMER
DSP
DVD CINEMA SYSTEM
• For in-depth information about DVD operations, see
pages 24 to 33.
1

Turn On the Power

Before turning on the system, turn on your TV and select the correct
video input. (See the manual supplied with your TV.)
• When you use a JVC's TV, you can turn on your TV by pressing
TV on the remote control, and select the video input by
pressing TV/VIDEO. (If your TV is not a JVC's, see "Operating
Other Manufacturers' TV" on page 57.)
• For changing the OSD messages—the information on the TV
screen—into the desired language, see " Language Menu" on
pages 51.
Press AUDIO (or STANDBY/ON on the front
panel).
The STANDBY lamp goes off and the illumination lamp
on the center unit lights up. The source indication
selected previously appears on the display.
12
STANDBY/ON
AUDIO
1
TV VCR
AUDIO
SUBWOOFER
2 3 4
REAR-R
6 7 8
SETTING FM MODE
0
AUX PROGRESSIVE
TV/VIDEO
TV/VIDEO SEARCH
VCR
MUTING REC/MEMORY MUTING
AUDIO VOL
MENU
ENTER
ON SCREEN
4
SLOW
6
DSP SURROUND
SURROUND
SLEEP
RM-STHA35U
AUDIO
2

Select the Source

Press DVD.
The source changes to DVD.
3
Load a
DVD
On the front panel ONLY:
Press 0 to open the disc tray, then place a DVD
correctly with its label side up.
CORRECT
• DO NOT use the disc stabilizer.
4

Start Playback

3
Press .
The disc tray closes. "READING" appears for a
while.
3
• You can also start playback by closing the disc
tray using 0 on the front panel.
5
A
djust the Volume
From the remote control :
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
press and hold AUDIO VOL –.
On the front panel :
To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
turn VOLUME control counterclockwise.
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Notes:
• By pressing AUDIO VOL + or – repeatedly, you can adjust the
volume level step by step.
• The volume level can be adjusted within 64 steps—
"MIN (minimum)," 01 to 62, and "MAX (maximum)."
• If you have turned off the unit with the volume level set at more than
level "25," the volume level will be automatically set at level "25" next
time you turn on the unit.
DVD
INCORRECT
AUDIO VOL
VOLUME