Tuner; Listening To The Radio - Pioneer KEH-P4025 Manual Del Usuario

Tuner

Listening to the radio

1
If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 17).
1 indicator
BAND
Shows which band the radio is tuned to, AM
or FM.
2 indicator
FREQUENCY
Shows to which frequency the tuner is
tuned.
3
PRESET NUMBER
Shows what preset has been selected.
4 () indicator
STEREO
Shows that the frequency selected is being
broadcast in stereo.
7 En
2 3 4
indicator
1 Press to select the tuner
SOURCE
2 Use to adjust the sound level.
VOLUME
When you press
VOLUME
raised and when pressed down/–, the volume is
lowered.
3 Press to select a band
BAND
Press until the desired band is displayed,
BAND
, , for FM or
F1 F2 F3 AM
4 To perform manual tuning, press 2 or 3
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold 2
or 3 for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
2 or 3 with a quick press.
• If you press and hold 2 or 3 you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
• When the frequency selected is being broad-
cast in stereo the
STEREO ()
light.
.
up/+, the volume is
.
.
indicator will