Silvercrest SGM 110 A1 Instrucciones De Uso página 37

–
Wipe the plastic part of the motor unit
born soiling use a mild detergent on the cloth. For inaccessible corners
use the supplied cleaning brush
–
Wipe off any detergent residues using a cloth moistened with clean
water. Make sure the sealing ring is correctly placed inside the plastic
section of the motor unit
–
Fit the two sections together so that the - marking on the lower section
(metal) is aligned with the - marking on the motor unit
by turning the lower section (metal) anticlockwise. Make sure you turn
the lower part (metal) as far as possible in an anticlockwise direction to
prevent leaks.
■ Rinse the output unit
■ Dry all parts well. Make sure that all parts are completely dry before reassem-
bling the appliance.
NOTE
► Take particular care to ensure that the metal contact on the motor unit
and those in the housing
might malfunction!
■ 34 │ GB│IE
Fig. 6
.
(see fig. 6).
in warm water containing a mild detergent.
are completely dry. Otherwise the appliance
with a damp cloth. For stub-
. Lock them
SGM 110 A1