Maintenance And Service; Maintenance And Cleaning; Spare Parts; After-Sales Service And Application Service - Bosch GNF 20 CA Professional Manual Original

OBJ_BUCH-126-002.book Page 22 Wednesday, February 19, 2014 1:49 PM
22 | English
Parallel Guide (GNF 20 CA)
To cut additional parallel slots, press the guide bolt 15 of the
parallel guide 14 down into the already cut slot and then carry
out the cutting procedure.
Information on Structures
Slots in structural walls are subject to the Standard DIN 1053
Part 1, or country-specific regulations.
These regulations are to be observed under all circumstanc-
es. Before beginning work, consult the responsible structural
engineer, architect or the construction supervisor.
The permitted slot depth and width depends on the slot
length, wall thickness and the building material used.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine itself, pull the mains
plug.
 For safe and proper working, always keep the machine
and ventilation slots clean.
After finishing work, dismount the clamping fixtures and clean
all clamping parts as well as the protective cover.
Please store and handle the accessory(-ies) carefully.
Service Indicator 11 (GNF 35 CA)
When the carbon brushes are worn out, the machine switches
itself off. This is indicated approx. 8 hours beforehand by the
lighting or blinking of the service indicator 11. The machine
must then be sent to an after-sales service agent. Addresses
are listed in the Section "After-sales Service and Application
Service".
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.

Spare Parts

GNF 20 CA
Mounting flange 17
Spacer discs, 4 mm 19
Clamping nut 20
3 609 929 C89 | (19.2.14)
GNF 35 CA
Mounting flange 17
Spacer discs, 4 mm 19
Spacer discs, 6 mm 19
Clamping nut 20

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
3 600 390 023
3 609 202 041
Republic of South Africa
3 603 345 005
Customer service
Hotline: (011) 6519600
3 609 202 039
3 609 202 041
3 609 202 042
3 609 202 040
Bosch Power Tools