Heated Appliances (Ebsh/50-50 And Ebsh-T/50-50) - Hupfer Korbstapler KO/50-50 Manual De Instrucciones

Transport, Assembly, Putting into Operation and Decommissioning
Assembly (Built-in appliances only)

Adjust the height-adjustable screw feet so that the appliance can be positioned under the worktop.

Position the appliance exactly under the cut-out in the counter and adjust the screw feet.

Fasten the stacking compartment in the worktop cut-out using 4 angled guides.
EBS-T/50-50
Figure 6

Insert the appliance EBS-T/50-50 into the worktop cut-out from above. Fasten the screw feet, if nec-
essary.
4.2.2

Heated Appliances (EBSH/50-50 and EBSH-T/50-50)

DANGER
ATTENTION
NOTE
4330007_A0
Assembly instructions EBS-T/50-50
Hazardous electrical voltage
The electrical voltage may be considerably dangerous to limb and life of per-
sons and lead to injuries.
All work on the electrical installations should only be carried out by a certified
electrician or by authorised specialists under supervision and monitoring of a
certified electrician according to the certain electro-technical regulations.
Risk of hot surfaces
The internal surfaces and base plates of the heated appliances can become
hot during and/or after the operation. The heated appliances should not come
into contact with light inflammable materials.
Ensure that there is enough space between the housing and cladding re-
quired for air circulation.
Appliance location
The built-in appliances may only be put into operation after being retrofitted or
built-in (e.g. in a cabinet).
KO/50-50 | KO/65-53 | KO/50-50K | KO/65-53K | KOUH/50-50 | KOUH/65-53 | EBS/50-50 | EBS-T/50-50 | EBSH/50-50 | EBSH-T/50-50
Chapter 4
Page 21
Basket Dispenser