Maintenance And Cleaning - Kamikaze KV 360 Manual De Uso

ELECTRIC PRUNING SHEARS
14.2. OPENING CHANGE (ONLY IN PROGRESSIVE MODE)
The KV360 shears incorporates a system of change of opening with memory.
It means that we can adjust the opening of the head in function of the
diameter of cut wished.
In the progressive cutting control mode, the cutting diameter can be
adjusted and a smaller cutting diameter can be set, for which the position of
the blade at the desired cutting diameter must be maintained for 1 second
and an audible warning will sound (a beep) indicating that the selected cut-
off opening diameter has been memorized.
Press the trigger twice in rapid sequence to activate the pruner and a
confirmation tone will sound.
To return to full open, keep the trigger pressed until you hear two beeps,
one single then three in sequence, indicating that the opening memory has
been removed.

15. MAINTENANCE AND CLEANING

Tools to be repaired must be sent to Customer Assistance Service.
Use original part keeps the tool good condition and safe.
Disconnect the battery from the tool before checking, maintaining
and repairing the pruning shear, to avoid risk of unexpected
activation of the tool.
Warning!
In particular situations of very hard use, the blade and the handle could reach
high temperatures. It is recommended to handle the pruner with care, using
protective gloves.
Please wear glove before you check the blade is sharp or not, that
is to avoid blade hurt you.
76
www.kamikazevolpi.com