Maintenance And Cleaning - Kamikaze KV 3 Manual De Uso

ELECTRONIC TYING MACHINE
The repair work and functions unmentioned in the instructions
shall be implemented by the Service Centre. To ensure safe usage,
only original parts can be used.
14. MAINTENANCE & CLEANING
Before to start any cleaning or maintenance operation, switch off
the equipment and disconnect the connection between battery
and the equipment. Place battery in a safe package.
• Cleaning and maintenance must be carried out regularly to ensure the
long-term and reliable operation of the equipment.
• Don't spray water on the equipment or immerse it in water, otherwise
the equipment will be damaged.
• Keep ventilating slot, engine chamber, and equipment handle clean. It
shall be cleaned with a wet cloth or a hair brush. Don't use any cleaning
agent; otherwise it may cause permanent damage to the equipment.
• Each time after one roll of tying wire is used up, please use tweezers or
a brush to clear up foreign matters in wire track.
• After continuing working for 8 hours, use tweezers or a brush to clear
up foreign materials in the wire track. Check if the pin, retaining ring,
and spring of each movable joint have any foreign material, if there is
any foreign material, remove it immediately.
• Fill sufficient lubricating oil at cutter and each joint.
• Good maintenance habit can extend the service life of the product
effectively.
75
www.kamikazevolpi.com