Charging The Battery; Battery Charging Procedure - Kamikaze KV 360 Manual De Uso

ELECTRIC PRUNING SHEARS

10. CHARGING THE BATTERY

Do not dispose battery under high temperature or vibration
environment to avoid liquid leakage from the battery.
Disconnect the battery from tool before charging.
Always make sure the battery is dry and clean before charging.
• Make sure the battery is fully charged before first time using.
• The battery is not fully charged when you buy, you must charge 2,5 hours
before using first time.
• Before recharging the battery, check the remaining charge on the display.
• Need to replace battery if battery running time is not enough. Users can
only use the original equipment manufactured by the customer center
(OEM) battery pack.
• Keep safety rules and environment protection information in mind all the time.

10.1. BATTERY CHARGING PROCEDURE

• Charge at temperature of +10°C~ 22°C indoor.
• The three-way battery charger allows you to recharge the three batteries
supplied at the same time.
• Make sure specifications on battery and adapter matched before charging.
• Connect the plug of the battery charger to the battery to recharge it (if it
is necessary it is possible to connect all three batteries at the same time).
• The batteries will be recharged simultaneously.
• The Red LED on the battery charger indicates that charging is in progress,
the Green LED indicates that the batteries are fully charged. The average
charging time is 2/3 h for each battery.
• Please make sure the battery charged at least once every 4 months when
the battery is not using.
72
www.kamikazevolpi.com