Receiving Weather Or Traffic Information From Sat Radio; Instant Replay Function (Sirius Only); Changing The Display; Setting The Auxiliary Data Field Display - Alpine CDA-9883 Manual De Operación

Receiving Weather or Traffic Information
from SAT Radio
1
Select the SAT Radio Channel for your local traffic/
weather information.
2
Press and hold / /ENT for at least 2 seconds in
the SAT mode.
The received weather or traffic channel is stored.
3
Press and hold BAND for at least 2 seconds.
The stored Weather or Traffic channel will be recalled.
4
Press and hold BAND for at least 2 seconds.
Returns to normal mode.
• Stored channels can also be recalled by pressing and holding BAND
for at least 2 seconds.
• Channel other than Weather or Traffic can also be stored and recalled.

Instant Replay Function (SIRIUS only)

In SIRIUS mode, the current channel is saved using the Instant Replay
memory function. Use this function to pause the channel content at any
time. When playback is continued, it will begin at the position it was
paused. This function can be used to store up to 44 minutes of audio.
1
During SIRIUS reception, press
the Instant Replay mode.
"REPLAY MODE" is displayed, and the received station is
stored.
2
Press / /ENT again to select the play mode.
The stored contents are played back.
During playback:
Fast reverse: Press and hold
Fast forward: Press and hold
Returning to the beginning of the current song:
Advancing to the beginning of the next song:
• If you continue to press Fast forward until the end, the INSTANT
REPLAY mode is canceled, and the unit will change to usual
reception.
3
Press /ESC for at least 2 seconds to cancel the
INSTANT REPLAY mode.
The unit returns to usual SIRIUS broadcasting mode.
Time display example during REPLAY playback (Instant
Replay Mode only)

Changing the Display

Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or Sirius channel. The
unit can display this text information as explained below.
In XM or SIRIUS mode, press TITLE.
Each time you press this button, the display changes as shown
below.
1
* Displayed only during instant replay.
2
* SIRIUS mode only.
3
* XM mode only:
When ADF is turned OFF, this information is not displayed (see
"Setting the Auxiliary Data Field Display" on page 23).
/ /ENT to select
• When the "Scroll Setting (TEXT SCROLL)" (page 18) is set to
"SCROLL AUTO", the display scrolls continuously. When the Scroll
Setting is set to "SCROLL MANU", the display scrolls only once
after any function is performed (PRESET, BAND, SEARCH, etc.).
"CHANNEL No." and "CLOCK" displays do not scroll.
• Depending on the model, the display may differ from the one shown
above.
.

Setting the Auxiliary Data Field Display

.
Press .
The XM Auxiliary Data Field (ADF) display can be switched on or off.
Press .
There is no ADF function for the SIRIUS receiver.
1
2
3
4
• Pressing
• If no operation is performed for 60 seconds, SETUP is canceled.
S1 3
C H 1 8 4 4 3 5 9
CHANNEL No./(REMAINING TIME)*
CHANNEL NAME ARTIST NAME
2
COMPOSER NAME* AUXILIARY DATA FIELD*
CLOCK CHANNEL No./(REMAINING TIME)*
Press and hold FUNC./SETUP for at least 2
seconds to select the SETUP selection mode.
Turn the Rotary encoder to select the XM ADF
mode, and then press /
Turn the Rotary encoder to select XM ADF ON/
OFF, and then press /
When setting to ON, Auxiliary Data Field is displayed by
pressing TITLE (Refer to the "Changing the Display"
section page 23.)
Press and hold FUNC./SETUP for at least 2
seconds to return to normal mode.
/RTN returns to the previous SETUP mode.
Play Time
(Remaining time for
INSTANT REPLAY.)
1
CATEGORY NAME
SONG TITLE
3
1
/ENT.
/ENT.
23
-EN