CAMPAGNOLO BRAKES Manual Del Usuario página 19

5 mm Allen wrench
Torque wrench
• Fit the brake on the frame or the fork and
tighten the socket-head nut (A - Fig. 1) using
a 5 mm Allen wrench.
• Fix the cable, tightening the cable clamp
screw (B - Fig. 1) to a torque of 5 Nm - 44
in.lbs using a 5 mm Allen wrench.
WARNING!
Please be sure that you tighten the cable
sufficiently, without crushing the cable,
so that it does not slip when brakes
are applied. A loose or damaged cable
can cause the brake system to malfunction
resulting in an accident, personal injury
or death.
• Initially center the brake in relation to the
wheel using the lock-nut (D - Fig. 2) and a 12
mm open end wrench in order to position the
brake pads about 1 mm from the surface of
the rim (Fig. 3).
If necessary, perform fine adjustment using the
cable tension adjustment screw (C - Fig. 1).
ENGLISH
1 - TOOLS
2 mm Allen wrench
12 mm open end wrench
2 - ASSEMBLY
5 Nm
(44 in.lbs)
A
B
1
2
C
D
19