Spare Parts; Transportation And Storage; Inspect The Delivery; Transportation Guidelines - Lowara ecocirc XL Manual De Instalación, Funcionamiento Y Mantenimiento

For information about warranty, see the sales con-
tract.

1.5 Spare parts

WARNING:
Only use original spare parts to replace
any worn or faulty components. The use
of unsuitable spare parts may cause
malfunctions, damage, and injuries as
well as void the guarantee.
For more information about the product's spare
parts, refer to the Sales and Service department.
1.6 EC DECLARATION OF CONFORMITY
(ORIGINAL)
XYLEM SERVICE ITALIA SRL, WITH HEADQUAR-
TERS IN VIA VITTORIO LOMBARDI 14 - 36075
MONTECCHIO MAGGIORE VI - ITALY, HEREBY
DECLARES THAT THE PRODUCT
CIRCULATOR (SEE LABEL ON FIRST PAGE) *
[* in one of following versions: ECOCIRC XL, ECO-
CIRC XLplus, ECOCIRC XLplus with RS485 mod-
ule, ECOCIRC XLplus with module Wireless. RS485
and Wireless modules supplied on request with the
mounting on installer's care].
FULFILS THE RELEVANT PROVISIONS OF THE
FOLLOWING EUROPEAN DIRECTIVES
• MACHINERY 2006/42/EC (ANNEX II: THE
TECHNICAL FILE IS AVAILABLE FROM XYLEM
SERVICE ITALIA SRL)
• ELECTROMAGNETIC COMPATIBILITY
2004/108/EC.
• ECODESIGN 2009/125/EC, REGULATION (EC)
No.641/2009, REGULATION (EU) No. 622/2012:
EEI ≤ 0, .... (SEE LABEL ON FIRST PAGE). (An-
nex I: "The benchmark for the most efficient cir-
culators is EEI ≤ 0,20.").
AND THE FOLLOWING TECHNICAL STANDARDS
• EN 60335-1, EN 60335-2-51, EN 62233.
• EN 55014-1:2006 + A1:2009 + A2:2011, EN
55014-2:1997 + A1:2001 + A2:2008, EN
61000-3-2:2006 + A1:2009 +A2:2009, EN
61000-3-3:2008, 61800-3:2004+A1:2012.
• EN 16297-1, EN 16297-2.
MONTECCHIO MAGGIORE,
02.09.2013
AMEDEO VALENTE
(DIRECTOR OF ENGINEERING
AND R&D)
rev.01
Lowara is a trademark of Xylem Inc. or one of its
subsidiaries.

2 Transportation and Storage

2.1 Inspect the delivery

1. Check the outside of the package.
2. Notify our distributor within eight days of the de-
livery date, if the product bears visible signs of
damage.
3. Remove the staples and open the carton.
4. Remove the securing screws or the straps from
the wooden base (if any).
5. Remove packing materials from the product.
Dispose of all packing materials in accordance
with local regulations.
6. Inspect the product to determine if any parts
have been damaged or are missing.
7. Contact the seller if anything is out of order.

2.2 Transportation guidelines

Precautions
WARNING:
• Observe accident prevention regula-
tions in force.
• Crush hazard. The unit and the com-
ponents can be heavy. Use proper
lifting methods and wear steel-toed
shoes at all times.
Check the gross weight that is indicated on the
package in order to select proper lifting equipment.
Position and fastening
The unit can be transported only in vertical position
as indicated on the package. Make sure that the unit
is securely fastened during transportation and can-
not roll or fall over. The product must be transported
at an ambient temperature from -40°C to 70°C
(-40°F to 158°F) with humidity <95% and protected
against dirt, heat source, and mechanical damage.

2.3 Storage guidelines

2.3.1 Storage location
NOTICE:
• Protect the product against humidity, dirt, heat
sources, and mechanical damage.
• The product must be stored at an ambient tem-
perature from -25°C to 55°C (-13°F to 131°F) and
humidity < 95%.

3 Product Description

3.1 Pump design

The pump is a wet rotor circulation pump with ener-
gy-efficient electronically commutated permanent
magnet technology, ECM technology. The pump
does not require a release/ventilation screw.
Intended use
The pump is suitable for:
• Domestic hot water (only for bronze pump hous-
ing models)
• Hot water heating systems
• Cooling and cold water systems
The pump can also be used for:
• Solar systems
• Geothermal systems
Improper use
en - Original instructions
17