Mounting The G-Led Beacon; Mounting The Trunnion-Mount Beacon; Figure 1 Beacon And Sounder Combination Fixture - Federal Signal Global Serie Instrucciones De Instalación Y Mantenimiento

Installation and Maintenance Instructions

Figure 1 Beacon and sounder combination fixture

Mounting the G-LED Beacon

ATTACH THE BEACON SECURELY: To prevent injury, this
apparatus must be securely attached to the mounting surface
in accordance with the installation instructions. Use installer-
supplied fasteners suitable for the mounting surface.
The mounting method and the installer-supplied mounting hardware
depend on which of the three G-LED models you are installing:

Mounting the Trunnion-Mount Beacon

For the beacon dimensions, see Figure 2 and Figure 3 on
page 9. Mount the trunnion bracket to a flat surface using
the two 7.0 mm mounting holes (Figure 4 on page 10). Use
installer-supplied fasteners suitable for the surface to which the
device will be mounted. To adjust the vertical angle of the beacon,
loosen the fasteners on the mounting bracket to disengage the
ratchet. Vertically aim the beacon, and tighten the fasteners.
8
Model G-LED Global Series LED Beacon