Unpacking The Beacon; Creating Combination Fixtures In The Field - Federal Signal Global Serie Instrucciones De Instalación Y Mantenimiento

Installation and Maintenance Instructions

Unpacking the Beacon

EXPLOSION HAZARD: A damaged lens can lead to explosions,
causing serious injury or death. If a lens is damaged, it must be
replaced.
After unpacking the beacon, examine it for damage that may have
occurred in transit. If it has been damaged, do not attempt to install or
operate it. File a claim immediately with the carrier, stating the extent
of the damage. Carefully check all envelopes, shipping labels, and tags
before removing or discarding them. Disposal of all shipping materials
must be carried out in accordance with national and local codes and
standards. If any parts are missing, please call Federal Signal Customer
Support at +1 708-534-4756 or +1 877-289-3246.

Creating Combination Fixtures in the Field

The Federal Signal Global Series Ex de products can be connected
together in the field using interchangeable E-box end caps and a
proprietary coupling system. The proprietary coupling system allows
for simple and cost effective, wiring from product to product, often
eliminating the need for expensive Ex wiring practices and Ex rated
glands. The E-box is available only when factory installed on an Ex d
unit or when used as a E-box spacer adjoining an existing E-box.
Refer to the accessories listed on page 27 for available options.
When creating certain fixture combinations, it is necessary to replace
the E-box end caps before mounting the product. If you are creating
combination fixtures, refer to instruction manual 25500259 for
specific instructions and details.
A note about combination fixtures: If the product is Ex db marked,
it is for use in gas atmospheres. If the product is Ex db e marked,
it uses increased-safety terminal enclosures and is for use in
gas atmospheres. The product is Ex tb marked for use in dust
atmospheres.
Model G-LED Global Series LED Beacon
7