Safety Messages To Maintenance Personnel - Federal Signal Global Serie Instrucciones De Instalación Y Mantenimiento

Installation and Maintenance Instructions

Safety Messages to Maintenance Personnel

Listed below are some important safety instructions and precautions
you should follow:
• Read and understand all instructions before operating this system.
• If you acquired a significant quantity of units, then it is
recommended that spares are also made available.
• Any maintenance to the beacon system must be done with power
turned off.
• Any maintenance to the beacon system must be performed by a
trained electrician who is thoroughly familiar with all applicable
national and local codes in the country of use.
• To avoid electrical shock hazards, do not connect wires when
power is applied. Failure to observe this warning may lead to
serious injury or death.
• Never alter the unit in any manner. Safety of the unit may be
affected if additional openings or other alterations are made to the
internal components or housing.
• Repair of flamepaths is not intended.
• The nameplate, which may contain cautionary or other information
of importance to maintenance personnel, should NOT be obscured
in any way. Ensure that the nameplate remains readable.
• After performing any maintenance, test the beacon system to
ensure that it is operating properly.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.
22
Model G-LED Global Series LED Beacon