System Programming; Prompting The We-6 - Alliance Laundry Systems UW35PV Instrucciones Se Operacion Y Programación De La Microcomputadora

Programming
Programming Hints
Cycle 00
Step Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
34
(Continued)
Min:sec
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Before attempting to program any particular
function of the WE-6 microcomputer, read the
System Programming, Cycle Programming,
and Step Programming subsections below.

System Programming

Prompting the WE-6

Prompting the WE-6 allows:
• Displaying sump temperature in
Centigrade or Fahrenheit.
• Recognizing and controlling one
or two independent drains. (Two
independent drains will apply only for
special applications.)
• Enabling or disabling the Advance key
in the RUN mode.
• Enabling or disabling the manual mode.
• Enabling or disabling wet clean functions
(affects Auxiliary 1 and 2 outputs).
• Selecting balancing routine (active if
inverter balance detection is utilized).
• Reading or resetting the cycle count.
To begin prompting the computer, insert key
into the program mode switch (located on the
left side of the control module) and turn key to
the PROGRAM position. The display will
read "CYC00."
1. Press the Auxiliary key, key 2, and
key 9 in that order. The display will read
either "CEN" (Centigrade) or "FAR"
(Fahrenheit). To choose the alternate
feature, press key 0.
F232089