Alliance Laundry Systems UW35PV Instrucciones Se Operacion Y Programación De La Microcomputadora página 33

c. Enter the desired time for the computer
to allow the machine to fill to high
level. Five minutes is acceptable. Press
key 5. The display will read "5M-00S."
Note: If the machine does not fill in the
amount of time programmed, the "FILL"
alarm will be displayed.
16. Press the Enter key. The display will
read "0739."
17. Add a sour for step 7:
a. Press the Supply key and key 3. The
display will read "S30739."
b. Press the Enter key. The display will
read "M---S."
c. Enter the length of time for the supply
to be activated. In this case, thirty
seconds is adequate.
Press key 0 for minutes; press key 3 and
then key 0 for seconds. The display will
read "0M-30S."
18. Press the Enter key as always after
programming a time duration. The display
will read "0839," indicating that the
computer is ready for step 8.
19. For step 8, program the agitation action for
the dilution rinse.
a. Press the Wash key and key 1 to
program an action with normal
reversing. The display will
read "W10839."
b. Press the Enter key. The display will
read "M---S."
F232089 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming
c. Enter the time for the dilution rinse
(three minutes).
Press key 3. The display will
read "3M-00S."
20. Press the Enter key. The display will read
"0939," indicating that the computer is
ready for step 9.
21. The dilution rinse water must be drained.
a. Press the Drain key. The display will
read "D-0939." Then press key 1. The
display will read "D10939."
b. Press the Enter key. The display will
read "M---S."
c. Enter the length of time the computer
will allow the machine to drain
(one minute).
Press key 1. The display reads
"1M-00S," indicating that a one-minute
step has been programmed.
22. Press the Enter key to move to step 10 of
the cycle.
23. An extract step should now be
programmed.
a. Press the Medium Speed key. The
display will read "MS1039," indicating
a medium-speed spin.
b. Press the Enter key. The display will
read "M---S."
c. Enter the length of time for the
medium-speed spin (one minute).
Press key 1. The display will
read "1M-00S."
24. Press the Enter key. The display flashes
"SDLY" for one second.
31