Alliance Laundry Systems UW35PV Instrucciones Se Operacion Y Programación De La Microcomputadora página 48

Programming
Step Programming
4. If Wash 1 is chosen, the no-reverse option
may be selected. The no-reverse option
must be selected at this point in the step
programming. Press the No Reverse key
while the display reads "W1nncc."
When the no-reverse option is selected,
the display will not indicate that no reverse
is selected, but the machine will follow the
programming command.
The no-reverse option will cause the
basket to run forward only at wash speed
for the time programmed.
The computer will return to normal
reversing action when this step
is complete.
The no-reverse option may be
programmed in wash, supply, heat,
and overflow steps. The No Reverse key
must be pressed just prior to pressing the
Enter key when programming a step.
5. Press the Enter key, and the display will
read "M---S." Now assign the wash step
time in minutes and seconds.
6. Press the Enter key and go to the next
step in the cycle.
46
(Continued)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
7. On machines equipped with optional
auxiliary heat (steam or electric), it is
possible to program a wash step with a
temperature step. During such a step, the
machine will perform the programmed
wash at the temperature programmed,
maintaining that temperature throughout
the step.
To program a wash with a specific
temperature, use the following procedure:
a. After step 3 of Programming a Wash
Step, press the Heat key before
pressing the Enter key. The display
will read either "080Fcc" or "025Ccc,"
depending on whether Fahrenheit or
Centigrade is prompted.
b. Now enter the desired temperature
for the machine to maintain during
the wash step.
Three digits must be entered for the
temperature. If the desired temperature
is less than 100 degrees, the first digit
must be 0. The valid temperature range
is 80–200 degrees Fahrenheit and
25–93 degrees Centigrade. The
computer will not accept temperatures
outside of this range. If 100 degrees
Fahrenheit is selected, the display will
read "100Fcc."
c. Now proceed with step 5.
F232089