Maintenance And Care; Switching The Appliance Off; Cleaning The Appliance; Gas Tap Maintenance - Hotpoint Ariston PK630RT Serie Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Maintenance and care

Switching the appliance off

GB
Disconnect your appliance from the electricity supply
before carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents such as
stain removers, anti-rust products, powder detergents
or sponges with abrasive surfaces: these may scratch
the surface beyond repair.
! Never use steam cleaners or pressure cleaners on
the appliance.
• It is usually enough to wash the hob with a damp
sponge and dry it with absorbent kitchen roll.
• The removable parts of the burners should be
washed frequently with warm water and soap and
any burnt-on substances removed.
• For hobs which ligth automatically, the terminal part
of the electronic instant lighting devices should be
cleaned frequently and the gas outlet holes should
be checked for blockages.
• Stainless steel can be marked by hard water that
has been left on the surface for a long time, or by
aggressive detergents containing phosphorus.
After cleaning, rinse and dry any remaining drops
of water.
• Before using the ceramic glass module, the surface
must be cleaned, using a damp cloth to remove
dust or food residues. The ceramic glass surface
should be cleaned regularly with a soultion of warm
water and a non-
abrasive detergent.
Periodically, special
products will need to
be used to clean the
surface. First,
remove all food
buildup or grease
with a cleaning
scraper, e.g.
(not
supplied.
Clean the cooking surface when it is still warm with
a suitable cleaning product (such as the one in the
Solutions product line available from any After-
Sales Service Centre) and paper towels. Then rub
with a damp cloth and dry. Aluminum foil, plastic
28
items, objects made of synthetic material, sugar
or foods with a high sugar content that have
melted onto the surface must be removed
immediatley with a scraper while the cooking
surface is still hot. Special cleaning products for
ceramic glass surfaces form a transparent
protective layer which fights diry buildup. This
also protects the surface from damage caused by
food with a high
sugar content. Do
not use abrasive
sponges or cleaning
products under any
circumstances. This
holds true for
chemically
aggressive cleaners,
like oven sprays and
stain removers.
! It is not necessary to remove the pan supports in
order to clean the hob surface. Thanks to the
support system, simply lift and hold the pan
supports or rotate them until they rest against a rear
support.

Gas tap maintenance

Over time, the taps may become jammed or difficult
to turn. If this happens, the tap must be replaced.
! This procedure must be performed by a qualified
technician authorised by the manufacturer.
Tabla de contenido
loading

Tabla de contenido