Daily Cleanning / End Of Work - Adler ECO35 Instalación Uso Y Mantenimiento

Ocultar thumbs Ver también para ECO35:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

5- Wait until indicator light "F" is OFF. Open the
door and download clean dishes basket.
-
If during this process door is opened, the
washing cycle is interrupted until door is closed.
To continue and finish washing cycle you must
close the door.
WARNING!
THE APPLIANCE WILL NOT REMOVE BURNT
FOOD DEPOSITS FROM DISHES. DISHES WITH
BURNT-ON FOOD DEPOSITS SHOULD BE
CLEANED MECHANICALLY/CHEMICALLY (FOR
EXAMPLE,
PRE-WASH
WATER) BEFORE PUTTING THEM IN THE
DISHWASHER.
THE USE OF "FOAMING" AND NOT SPECIFIC
DETERGENTS OR IN ANY CASE DETERGENTS
USED IN DIFFERENT WAYS FROM THAT
PRESCRIBED BY THE MANUFACTURER OR
FAILURE TO REMOVE THE RESIDUALS OF
DETERGENT POSSIBLY USED FOR MANUAL
PREWASH CAN CAUSE MALFUNCTIONING OF
THE
DISHWASHER
WASHING RESULTS.
3C4 – STANDARD LOADING RACKS
1- Load plates in frontal position. (Fig.34)
Fig.34
2- Load glasses and bowls in upside down
position. (Fig.35)
Fig.35
3- Load cutlery vertically inside its containers.
(Fig.36)
Fig.36
UNDER
RUNNING
AND
COMPROMISE
4- Load rack machine with dishes as
described on the figure.
For undercounter models load the rack front
side. For hoodtype models load the rack
front side or sideways (if necessary switch
rack support clockwise). (Fig.37)
Fig.37
3D – DAILY CLEANNING / END OF
WORK
In order to have excellent washing results
and a cleaned tank, it is recommended to
change the water of the machine at least
twice a day and clean accurately all the
filters inside the tank. Filters must be
removed only once all the water is
drained out of the machine.
3D1 – WATER DRAIN (
MACHINE WITHOUT DRAIN PUMP
INCLUDED
1- Turn OFF the machine by pressing
button "A" On/Off.
2- Open the door and remove the water
flow device and close the door. (Fig.38)
Fig.38
3- Wait until all the water is completely
drained out from the tank and turn OFF
the machine by pressing button "A".
3D2 – WATER DRAIN (
ELECTRONIC MACHINE
1- Turn OFF the machine by pressing
button "A" On/Off.
2- Open the door and remove the water
flow device and close the door. (Fig.39)
Fig.39
3- On the display will appear water drain
message during process. (Fig.40)
Fig.40
MECHANICAL
)
)
16
Tabla de contenido
loading

Tabla de contenido