Starting / Wash Cycles (Mechanical Version); Control Panel - Adler ECO35 Instalación Uso Y Mantenimiento

3C – STARTING / WASH CYCLES
(MECHANICAL version)

CONTROL PANEL

LEGENDA
A = On/Off
B = Drain Water Tank
C = On Machine Indicator Light
D = Machine Ready Indicator Light
E = Start Cycle
F = Washing Cycle Indicator Light
N.B.
The control panel represented above is full version.
Some versions may have not all the indicated functions.
3C1 – STARTING THE MACHINE
1- Open the door and verify that all internal
components, the water flow device included,
are in the correct position. (Fig.26)
Fig.26
2- Open main water supply cock.
3- Switch on at the mains.
4- Close the door and press button "A" to turn
ON the machine. Indicator light "C" is ON.
(Fig.27)
A
Fig.27
- If during this process door is opened, the
filling water tank process is interrupted. To
continue filling process close the door.
- After water heating process is finished and
the temperature is reached, indicator light is
visualized on position "D" machine READY to
use. (Fig.28)
Fig.28
3C2 – DETERGENT FILLING
PROCESS (versions without
automatic detergent pump only)
Glasswasher Models:
- Begin filling the tank with 3
detergent spoons and 1 spoon in
betwenn 2/3 washing cycles.
Dishwasher Models:
- Begin filling the tank with 5/6
detergent spoons and 1 spoon in
between 2/3 washing cycles.
N.B.
All dishwashers are pre-set for
electrical connection of external
automatic detergent pump or
automatic detergent pump kit
through the injector and related
tube or by the hole located on the
back tank of the machine.
THIS MODIFICATION, IF REQUIRED,
MUST BE CARRIED
QUALIFIED TECHNICIAN ONLY.
3C3 – WASHING CYCLE
Washing cycle is composed by one
hot cycle with detergent at 60°C
(140°F) and one hot final rinse with
rinse aid at 85°C (185°F).
When the machine reaches the
correct temperature and it is ready to
start a new cycle, indicator light is
visualized on position "D", then:
1- Open the door.
2- Add recommended quantity of
detergent inside the tank – only
models without
dispenser included
par.3C2).
3- Insert dirty loaded dishes basket
and close the door. (next page)
4- Press button "E" start washing
cycle. Indicator light "F" is ON for
the entire period of washing.
(Fig.29)
E
Fig.29
OUT BY
automatic
– (see
15