Dell OptiPlex 745 Guía De Referencia Rápida página 12

Ocultar thumbs Ver también para OptiPlex 745:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3
network adapter
connector
4
network activity light
5
line-out connector
6
line-in/microphone
connector
7
USB 2.0 connectors (6)
8
video connector
9
serial connector
12
Quick Reference Guide
To attach your computer to a network or broadband device, connect one end of a
network cable to either a network jack or your network or broadband device.
Connect the other end of the network cable to the network adapter connector on
the back panel of your computer. A click indicates that the network cable has been
securely attached.
NOTE:
Do not plug a telephone cable into the network connector.
On computers with a network connector card, use the connector on the card.
It is recommended that you use Category 5 wiring and connectors for your
network. If you must use Category 3 wiring, force the network speed to 10 Mbps to
ensure reliable operation.
Flashes a yellow light when the computer is transmitting or receiving network
data. A high volume of network traffic may make this light appear to be in a steady
"on" state.
Use the green line-out connector to attach most speakers with integrated
amplifiers.
Use the blue and pink line-in/microphone connector to attach a record/playback
device such as a cassette player, CD player, or VCR.; or a personal computer
microphone for voice or musical input into a sound or telephony program.
Use the back USB connectors for devices that typically remain connected, such as
printers and keyboards.
Plug the cable from your VGA-compatible monitor into the blue connector.
NOTE:
If you purchased an optional graphics card, this connector will be covered by
a cap. Connect your monitor to the connector on the graphics card. Do not remove
the cap.
NOTE:
If you are using a graphics card that supports dual monitors, use the y-cable
that came with your computer.
Connect a serial device, such as a handheld device, to the serial port. The default
designations are COM1 for serial connector 1 and COM2 for serial connector 2.
For more information, see your online User's Guide.
Tabla de contenido
loading

Este manual también es adecuado para:

DctrDcneDcsmDccy

Tabla de contenido