Assembly - Attaching The Blades; Attaching The Blades To The Blade Brackets - Home Decorators Collection 60-SUDE Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
7
Mounting the fan-motor assembly
(standard mount)
WARNING: When using the standard ball/downrod mounting,
the tab in the ring at the bottom of the mounting bracket
must rest in the groove of the hanger ball. Failure to properly
seat the tab in the groove could cause damage to the wiring.
□
Align the locking slots of the canopy (C) with the two
screws (DD) and alignment post (KK) in the mounting
bracket (A).
□
Push up the canopy (C) and turn clockwise until the
alignment post (KK) engage to the round hole and the
screws (DD) engage to the key slots.
□
Firmly tighten the two mounting screws (DD).
□
Install the decorative bottom cover (FF) by aligning the
cover slots with screws in the bottom of the canopy
(C). Rotate the bottom cover (FF) clockwise to lock in
place.

Assembly - Attaching the Blades

1
Attaching the blades to the blade
brackets
□
Attach a blade (G) to blade bracket (E) by inserting the screws
(AA) into the holes in the blade (G) and through the blade
bracket (F).
□
Tighten each screw securely.
□
Repeat this step for each blade and blade bracket.
2
Fastening the blade assemblies to
the motor
□
Insert the blade/ blade bracket assembly through the hole in
the side of the center flywheel on the fan-motor assembly (E).
Align the two screw holes in the blade bracket with the screw
holes in the center flywheel and secure with screws (CC).
□
Repeat these steps for the remaining blades.
G
F
11
Please contact 1-800-986-3460 for further assistance.
KK
AA
F
CC
HOMEDEPOT.COM/HOMEDECORATORS
A
DD
C
B
FF
E