Assembly - Attaching The Blades - Home Decorators Collection 52-FORY Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
5
Installing the flywheel
□
Align five alignment posts (QQ) in the flywheel with five
round holes in the bottom of the fan-motor assembly (B).
Push up the flywheel (D) so that the alignment posts (QQ)
are engaged into the round holes.
□
Secure the flywheel (D) to the fan-motor assembly (B)
by installing five screws (CC) to the round holes on the
flywheel and tighten them.
□
Make sure all the screws are firmly tightened.

Assembly - Attaching the Blades

6
Attaching the blades
□
Attach a blade (E) to the flywheel (D) by inserting the blade
(E) into slots in the side of the flywheel (D) and aligning the
three screws holes in the blade with the holes in the center
flywheel and secure with screws (AA).
□
Make sure all the screws are firmly tightened.
□
Repeat these steps for the remaining blades.
Assembly - Attaching the Light Kit
7
Installing the light kit pan
□
Remove one screw (OO) from the black bracket below the
fan motor assembly (B), and loosen but do not remove the
other two screws.
□
Connect the 9-pin plug exiting the bottom of the fan motor
assembly (B) to the 9-pin plug from the light kit pan (F). Be
sure the plug connections snap together completely.
□
Push the light kit pan (F) up to the fan motor assembly (B) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (F) clockwise.
□
Re-install the screw (OO) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
9
Please contact 1-800-986-3460 for further assistance.
QQ
B
D
CC
B
E
D
AA
B
F
OO
HOMEDEPOT.COM/HOMEDECORATORS