Assembly - Attaching The Fan Blades - Home Decorators Collection 51528 Guía De Uso Y Cuidado

Assembly - Attaching the Fan Blades

1
Attaching the blades to the blade
brackets
□
Attach a blade (F) to a blade bracket (G) by inserting screws
(AA) into the holes in the blade and through the blade
bracket.
□
Tighten each screw securely.
□
Repeat these steps for each blade (F) and blade bracket (G).
Assembly - Standard Ceiling Mount
1
Preparation for standard mounting
□
Remove the canopy ring (M) from the canopy (C) by turning
the ring counter-clockwise until it unlocks.
□
Remove the mounting bracket (A) from the canopy (C) by
loosening the two canopy screws (DD) located in the "L
shaped" slots.
□
Remove and save the two canopy screws (EE) in the round
holes. This will enable you to remove the mounting bracket
(A).
DD
2
Fastening the blade assemblies to
the motor
□
Insert the blade/blade bracket assembly through the hole in
the side of the center flywheel on the fan-motor assembly
(E), align the two screws holes in the blade bracket with the
screw holes in the center flywheel and secure with screws
(CC)
□
Repeat this step for the remaining blade assemblies.
AA
F
G
2
Routing the wires
□
Route the wires exiting at the top of the fan-motor
assembly (E) through the canopy ring (M).
□
Make sure the slot openings are on top and route the
wires through the canopy (C) and then through the ball/
downrod assembly (B).
A
EE
C
M
7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
CC
E
C
M
B
E