Suspensions Settings According To The Weight Of The Rider; Static Sag Load Test - Beta Motorcycles RR 125 2T EUROPA Manual Del Usuario

3

SUSPENSIONS SETTINGS ACCORDING TO THE WEIGHT OF THE RIDER

The table below shows the spring constant K of the suspensions (fork and shock
absorber) depending on the weight of the driver.
Refer to the accessories catalogue Betamotor to obtain the spring codes.
Version
RR125
RR200-
250-300
Standard settings
EN
H
Rider weight
[kg]
70-90
90-110
>110
<60
60-70
70-90
90-110
110-130
>130

STATIC SAG LOAD TEST

To verify the static sag of the shock ab-
sorber proceed as follows:
H
1
- Place the motorcycle on the work stand.
- Measure the vertical distance between
the rear wheel axle and a reference point
on the rear fairings.
- Write down the dimension H
- Remove the work stand.
- Keep the motorcycle in vertical position
and measure again the distance between
the wheel axle and the reference point
previously established.
- Write down the dimension H
2
Verify that the value of the static compres-
sion X = H
on page 11. Otherwise, perform the
adjustment of the spring preload as de-
scribed above.
K (Spring constant)
FORK [N/mm] SHOCK ABSORBER [daN/mm]
4,0
4,2
4,6
X
X
4,2
4,2
4,6
4,8
52
1
- H matches the one shown
1 2
4,8
5,0
5,2
4,8
5
5,2
5,4
5,6
5,8
.
.
2