Adjusting The Spring Preload; Adjusting The Compression Damper; Adjusting The Suspensions - Beta Motorcycles RR 125 2T EUROPA Manual Del Usuario

ADJUSTING THE SPRING
PRELOAD
The spring pre-load instead adjusts the bike
setup, especially according to the rider's
weight. The front setup raises by moving
the adjustment control B clockwise, and it
lowers by moving it anticlockwise.
N.B. When the spring pre-load adjuster
is turned, the hydraulic compression ad-
juster rotates too, but the latter does not
change its setting.
ADJUSTING THE COMPRESSION
DAMPER
Hydraulic compression adjuster C is used
to manage the ability of the fork to absorb
a shock. The adjuster closes by moving the
control towards the + sign, thus increas-
ing the braking effect; the adjuster opens
by moving the control towards the – sign,
thus decreasing the braking effect.
For standard calibration, refer to page
11.

ADJUSTING THE SUSPENSIONS

Suggestions for adjustment according to
use
• Increased comfort
To make it easier to follow the ground and
its roughness, open (turn towards "-") the
compression control C by about 5 clicks.
If after the modification the result is not as
expected, the setup of the bike is probably
too low and it is necessary to act on the
M03_L0007
C
M03_L0007
M03_L0016
49
3
B
A
EN