Adjusting The Hydraulic Compression Damper (High And Low Speeds); Adjusting The Spring Preload - Beta Motorcycles RR 125 2T EUROPA Manual Del Usuario

Ocultar thumbs Ver también para RR 125 2T EUROPA:

Tabla de contenido

Idiomas disponibles

ADJUSTING THE HYDRAULIC

COMPRESSION DAMPER (HIGH

AND LOW SPEEDS)

Adjustment for low compression speed:

•Using a screwdriver, loosen screw C

by turning it clockwise to increase the

hydraulic compression damper.

For standard setting, refer to page 11.

Adjustment for high compression speed:

•Turn knob D anticlockwise to decrease the

hydraulic compression damper.

For standard setting, refer to page 11.

Starting from the standard position, turn

the knob anticlockwise (with a closing ac-

tion), the center screw will have an integral

movement, then will rotate with the knob.

For standard setting, refer to page 11.

ADJUSTING THE SPRING

Loosen counter-ring E, rotate ring F clock-

wise to increase the spring preload (and

consequently the shock absorber preload)

or anticlockwise to decrease it. After ob-

taining the desired preload, turn counter-

ring E until it stops against adjusting ring F.

For standard setting, refer to page 11.

NOTE: for the handling of ring nuts use the

specific wrench provided in the standard

tool kit shown in the figure.

Capítulos

Tabla de contenido