Reset And Reinstatement Of Default Settings; Temporary Temperature Forcing - Gewiss Chorus GW 10 763 Manual De Usuario

It is possible to temporarily force the active temperature set point in Economy, Precomfort
and Comfort operation modes by using the
the value by pressing the
Reset and restore of default settings
Press the FAN and SET keys together for 2 seconds, when the device is powered by the
bus, to reset the thermostat.
Warning: all the previously set parameters will be cancelled.
When it is turned back on, the thermostat will use the default factory settings.
The thermostat goes into heating in OFF mode.
USER INSTRUCTIONS

Temporary temperature forcing

key or waiting for 5 seconds.
The ,
that the forcing is enabled.
If it is in SLAVE control mode, the variation in the
temperature set-point is limited to ± 3 °C and remains
active until it receives a new mode command from the
Master device.
50
keys to set the required value. Confirm
or will flash on the display to indicate