User Instructions; Behaviour Upon The Failure And Resetting Of The Power Supply; Maintenance; Parameter Setting - Gewiss CHORUS GW 16 972CB Manual De Instalación

Behaviour upon the failure and resetting of the power supply

If there is a power failure, the device will not implement any action. When the power supply is
restored, the thermostat will reactivate the conditions that were in place beforehand.
The thermostat is equipped with an energy accumulation system to maintain the time in
the event of a power failure (max 1h).
Following the drop and subsequent resetting of the power supply, the contact of the
integrated relay remains open.
The device does not require any maintenance. Use a dry cloth if cleaning is required.
CLEANING FUNCTION
This function makes it possible to temporarily inhibit the display so the glass plate can
be cleaned without making any unintentional modifications. The function can be
enabled/disabled as follows.
Enabling:
• touch the upper sector of the circular slider and the Mode button key at the same time
for at least 3 seconds.
• wait for a short beep (if the acoustic signal for glass cleaning is enabled) or the
contemporary flashing of the touch button keys (for the luminous signal that glass
cleaning has been enabled).
• wait for the count down to appear on the display (30 sec.) during which it is possible
to clean the plate.
Disabling:
• wait for the count down to reach zero.
Detailed information about the settings of the Wi-Fi thermostat parameters, the network
configuration and the setting of the user account for using the APP can be found in the
relative Programming Manual (www.gewiss.com).

USER INSTRUCTIONS

Maintenance

Parameter setting

17 17
I
E
N
N
S
G
L
L
I
I
S
S
N
H