Parameter Setting - Gewiss CHORUS GW 16 974CB Manual De Programación

The parameters relating to the thermostat are collected into two functional groups:
"basic" and "advanced" parameters.
To access "basic" parameters you only need to press the button key
keeping it pressed for longer gives access to the "advanced" menu. In both cases, the
icon lights up in green to indicate the activation of the parameter setting mode.
If the device is configured by ETS, the two functional sub-sets can be activated or
deactivated to visualisation and/or local change, depending on the setting of the ETS
"Parameters local modification" of the "Main" menu.
"Basic" parameters
USER INSTRUCTIONS

Parameter setting

If the operating type is "heating"
Set the operation set-point (if "setpoint" control)
Press the button key to access value change; after the
access, the current parameter value is displayed. Adjust the
value using the circular touch slider or the
To confirm the set value, press the
thirty seconds; expiry of the timeout (30 seconds) or
pressing the push-button
page without saving it.
Setpoint Comfort setting (if "HVAC" control)
Press the button key to access value change; after the
access, the current parameter value is displayed. Adjust the
value using the circular touch slider or the
To confirm the set value, press the
thirty seconds; expiry of the timeout (30 seconds) or
pressing the push-button
page without saving it.
5
briefly, whilst
push-button.
button key within
result in exiting the change
push-button.
button key within
result in exiting the change