Measurement Diagnosis; Cleaning And Maintenance; Preventing Malfunctions - VISIOMED bewell connect MyTensio Manual De Instrucciones

- The first 2 readings are displayed on the screen of the unit.
rd
- The 3 reading that appears on the screen is the average of the 3 readings
- Once the readings are taken, the average of your three readings is also displayed on the
application screen.
- Press the ON/START button again to turn the monitor off. If you forget, the unit turns itself
off automatically after about 1 minute.
Choice of the arm for the blood pressure measurement:
The first time, it's recommended to take the measurement in both arms. If one arm con-
sistently has higher blood pressure than the other (> 10 mmHg), that arm should be used
to measure your blood pressure except in the event of contraindications in this arm (You
should discuss differences higher than 10 mm Hg with your doctor).
If there is no asymmetry, the readings are often more easily taken in the non-dominant arm
( left for right-handed, right for left-handed).
Reference: American Heart Association. How to Monitor and Record Your Blood Pressure. http://www.heart.org/HEARTORG/Condi-
tions/HighBloodPressure/SymptomsDiagnosisMonitoringofHighBloodPressure/How-to-Monitor-and-Record-Your-Blood-Pressure_
UCM_303323_Article.jsp (Last visited Sept 2st, 2016)
Notes:
- The reading will be too low if the cuff is kept above heart level, and too high if it is kept below
heart level.
- If you wish to stop measurement during a pressure reading, simply press the ON/START button
to automatically stop the unit.
- Consult your physician if in doubt about using the blood pressure monitor.

4-8. MEASUREMENT DIAGNOSIS

The application automatically evaluates the MAM (Mean Arterial Measurement) and uses
AHA color coding in interpreting the results.

5. CLEANING AND MAINTENANCE

- Use a soft, dry cloth to clean the unit. If necessary, use a cloth lightly moistened with tap water.
- Do not use alcohol, benzene, thinner, or other chemicals to clean the unit or cuff.
- Before any use, it is advisable to wash your hands. Do not wash or wet the cuff.
- Avoid placing the unit in direct contact with sunlight, high humidity, or dust.

6. PREVENTING MALFUNCTIONS

- Do not drop the unit, avoid jolts and shocks.
- Do not insert anything into the unit.
- Do not disassemble the unit.
14 BewellConnect - BW-BW1 - User Manual - 022017v1
-
-
-
7