Downloading The Application; Startup; Measurement Diagnosis - VISIOMED bewell connect MyTensio BW-BW1 Manual De Instrucciones

- Sit on a chair with your feet flat (do not cross your legs), place your left arm on the ta-
ble, palm upward. The cuff should be at the same level as your heart. The heart is located
slightly below the armpit. In the event of difficulties in positioning your wrist at heart level,
use a support under your arm.
- Sit quietly for two minutes before the blood pressure measurement.
Note: For a better interpretation of the results, always take measurements using the same arm.

4-6. DOWNLOADING THE APPLICATION

The following information is subject to change.
Download the BewellConnect® application on your phone or tablet:
- Through the app store or Google Play
- or by scanning the QR code on the side of the box.
Then click on the My Tensio icon.

4-7. STARTUP

- Position the monitor as explained in Chapter 4-5.
- Launch the BewellConnect® application and click on My Tensio.
- Hit START on the screen (application) to start the measurement.
- The cuff will inflate automatically. The 3 blood pressure readings in a row are taken auto-
matically. The cuff inflates and deflates 3 times, following the procedure in the My Tensio
application. Do not remove the cuff before the end of the 3 readings. The readings are sent
automatically to the application via Bluetooth 4.0.
- The first 2 readings are displayed on the screen of the unit.
rd
- The 3 reading that appears on the screen is the average of the 3 readings
- Once the readings are taken, the average of your three readings is also displayed on the
application screen.
- Press the ON/START button again to turn the monitor off. If you forget, the unit turns itself
off automatically after about 1 minute.
Notes:
- The reading will be too low if the cuff is kept above heart level, and too high if it is kept below heart
level.
- If you wish to stop measurement during a pressure reading, simply press the ON/START button to au-
tomatically stop the unit.
- Consult your physician if in doubt about using the blood pressure monitor.

4-8. MEASUREMENT DIAGNOSIS

The application automatically evaluates the MAM (Mean Arterial Measurement) and uses
22 BewellConnect - BW-BW1 - User Manual - 082015