Warnings - VISIOMED bewell connect MyTensio Manual De Instrucciones

Dear Customer,
Thank you for purchasing MyTensio, the automatic blood pressure armband by BewellCon-
nect. We hope that you enjoy using it and recommend reading this user guide carefully to
measure your blood pressure accurately.
The ease of use of this device lets you to measure your blood pressure at any place and at
any time. Within seconds, the systolic and diastolic pressures, and heartbeat is measured
and transferred by Bluetooth 4.0, based on the oscillometric method of measuring blood
pressure.
For specific information about your own blood pressure, CONTACT YOUR PHYSICIAN.

1. WARNINGS

- Use this unit only for its intended purpose as described in these instructions.
- This unit can be used for personal use at home.
- Use this unit within an ambient temperature range between 50°F and 104°F / 10°C and 40°C.
- Do not expose this unit to extreme temperature conditions > 140°F or < -4°F > / > 60°C or < -20°C.
- Do not use this unit at a relative humidity above 90%.
- This unit should always be stored in a clean, dry place.
- Do not expose this unit to sunlight or water.
- Do not expose this unit to electrical shocks.
- Do not use this unit outdoors.
- Do not use the product while charging the device for risk of electric shock.
- Never drop this unit.
- Follow the maintenance instructions specified in this manual.
- Do not attempt to open the unit. In the event of a problem, contact customer service.
- Do not leave this unit within the reach of children.
- The measurement results are for informational purposes only. If unsure about your results,
please contact your physician.
- This product should not encourage self-medication or changes to your treatment.
- Stop using the unit in the event of a failure or malfunction.
- Electronic medical equipment requires special precautions regarding electromagnetic
compatibility, it must be installed and use in accordance with the ElectroMagnetic Com-
patibility information.
- The equipment is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the equipment can help prevent
electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmitters) and the equipment as recommend-
ed below, according to the maximum output power of the communications equipment.
BewellConnect - BW-BW1 - User Manual - 022017v1 7