ResMed Tango C Serie Guia Del Usuario página 5

Ocultar thumbs Ver también para Tango C Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Setting up the Tango
CAUTION
Be careful to place the device where it cannot be bumped, and where no one will
trip over the power cord.
If you put the device on the floor, make sure the area is free from dust and clear
of bedding, clothes or other objects that could block the air inlet.
Make sure the area around the device is dry and clean.
WARNING
Make sure the power cord and plug are in good condition and the equipment is
not damaged.
Only ResMed air tubing should be used with the device. A different type of air
tubing may alter the pressure you actually receive and reduce the effectiveness
of your treatment.
Blocking the hose and/or air inlet of the device while in operation could lead to
overheating of the device.
1
Connect the power cord to the rear of the Tango.
1.
Plug the other end into a power outlet.
2.
3.
Connect the air tubing to the air outlet of the Tango.
4.
Connect the assembled mask system to the free end of the air tubing.
2
3
3
4
Tabla de contenido
loading

Tabla de contenido