Panasonic CS-VE9NKE Instrucciones De Operación página 7

TO SET TEMPERATURE
2
• Selection range : 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
TO TURN OFF THE UNIT
3
TO SELECT FAN SPEED
4
AUTO
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
TO ADJUST AIRFLOW DIRECTION
5
AUTO
AIR SWING
AUTO
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fi x at
predetermined position. The vertical louver swing left/right
after the temperature rises.
• In POWERFUL mode, if AUTO is set, the vertical louvers
fi x at center position of the room according to installation
location setting.
TO REACH TEMPERATURE QUICKLY
6
• The temperature setting and the Fan speed automatically
adjusted for higher performance, and will adjust for
adequate operation once the temperature is reached.
• Press the button again or turn OFF the unit to stop this
operation.
TO ENJOY QUIET OPERATION
7
• This operation reduces airfl ow noises.
,
• Can be activated in all modes and can be cancelled by
pressing the respective button again.
F568728_YB0512-1062.indb 7 F568728_YB0512-1062.indb 7
TO CHANGE SETTING ACCORDING TO LIVING
8
ENVIRONMENT
• Complete below procedures to change the settings.
• 3 options are available in MENU.
CENTER
• Select preference setting.
• Indoor unit installation location
CENTER
• Indoor unit indicator brightness
BRIGHTER
LED
• Remote control LCD contrast
CONTRAST
4
3
• Press SET to confi rm the setting.
4
6
NOTES NOTES
, ,
• Cannot be selected at the same time.
• operation can be activated independently.
BRIGHTNESS CONTRAST
LEFT RIGHT
DIMMER ECONAVI
LED OFF
5 6 7 1 2
,
6/11/2012 9:43:27 AM 6/11/2012 9:43:27 AM
5
7
8
7