The equipment is intended only
for use in premises in which the
≥100A
current bearing capacity of the
network is >=100 A per phase
and which are supplied by a
distribution grid with a nominal
voltage of 400/230V.
Safety class II
Electric appliances should not be
disposed of in the domestic gar-
bage.
General notes on safety
•
This equipment is not intended for
use by people (including children) with
limited physical, sensory or intellectual
abilities or lack of experience and/or
lack of knowledge, other than with the
supervision of a person responsible for
their safety or with the instruction of the
same in terms of how to use the equip-
ment.
•
Children must be supervised in order
to ensure that they do not play with the
equipment.
•
People who are unfamiliar with the op-
erating instructions are not permitted to
use the equipment. The operation of the
equipment is not authorised for people
under the age of 16.
Working with the equipment
Caution: to avoid accidents and
injuries:
CAUTION. pressure washers
can be dangerous if they are
not operated correctly! The
jet must never be directed
at people, animals, electric
equipment connected to the
power supply or against the
actual pressure washer.
•
Use the equipment only on a flat, sta-
ble surface.
•
Do not direct the jet at yourself or others
in order to clean clothes and shoes.
•
To protect against water or dirt splash-
ing back, wear suitable protective cloth-
ing and safety goggles.
•
Do not operate the pressure washer
when other people are in the immediate
vicinity, other than they are also wearing
protective clothes.
•
Take appropriate measures to keep
children away from the equipment whilst
it is running.
•
Dispose of the packaging material cor-
rectly.
•
Do not use the equipment in the vicinity
of flammable liquids or gases. Non-
observance will result in a risk of fire or
explosion.
•
If you come into contact with cleaning
agents, rinse with plenty of clean water.
•
Store the equipment in a dry place and
out of reach of children.
Caution! To avoid damage to the
equipment and any possible per-
son injury resulting from this:
•
Do not work with damaged or incom-
plete equipment, or with equipment that
has been converted without the ap-
proval of the manufacturer. Before initial
operation, have a specialist check that
the required electrical protection meas-
ures are in place.
•
Never operate the pressure washer if
the power supply cable or other impor-
tant parts, such as the high-pressure
hose or the gun, are damaged.
•
Protect the pressure washer from frost
and dry running.
•
High-pressure hoses, fittings and cou-
plings are important for machine safety.
Use only high-pressure hoses, fittings
and couplings recommended by the
manufacturer.
GB
MT
35