First Installation - Watts BT-D03 RF Guía De Usuario

ENGLISH

3. FIRST INSTALLATION

See quick installation guide for installation.
Batteries installation.
• Open the cover and insert the 2 AAA
supplied batteries.
• Close the cover.
Thermostat pairing, RF wireless com-
munication initialization.
You must put your receiver or WATTS
Vision touch screen in radio pairing
®
mode (refer to the device leaflet).
On the back, push 5 sec the button for
direct access to initialization menu.
Following screens are displaying:
holding
button
Other method from parameter menu:
1 Press key to wake-up the thermostat
2 Press 5 sec
menu
Following screens are displaying:
Note:
After few seconds, the thermostat and the receiver/touch screen should exit from the RF
init mode, this is the normal procedure to confirm a correct pairing.
To make the installation easier, it will be better to have the thermostat near to the receiver
or touch screen during the configuration mode.
BT-D03-MOI-FR-W-EN-06-19
EN
Going to wireless initialization menu
key to enter parameter
holding
button
3 Press key to enter in initialization
Initialization
starting
releasing
button
5 sec
5