Special Functions; Keyboard Lock Function; Open Window Function; Valve Exercise Function - Watts BT-TH02 RF Guía De Usuario

5.

SPECIAL FUNCTIONS

5.1 Keyboard lock Function

Use this function to prevent all change of your
settings (In a child room, public area...)
• To activate the Key lock function, press
maintained the both LESS ( ) or MORE
( ) keys.
• The logo will be displayed on the screen.
• Repeat the same procedure to unlock the
key board.

5.2 Open window function

Conditions of open window detection:
The thermostatic head detects an "Open
window" if the room temperature decreases
by 5°C or more during a 30 minutes period
(or less).
In this case, the thermostatic head follows
7.0°C setting. The function remains active
until the room temperature increases or until
any key is pressed.
As an indicator of this function running, the
logo will blink.
Return to normal mode:
• Automatically: Room temperature increas-
es again for more than 1°C in less than
½ hour
• Manually: Press the ( ) button
Then the blinking logo
indicate the end of the detection and return to
previous setting temperature.
Special cases:
• This function doesn't work if Thermostatic
head is in OFF / Antifreeze Mode
16
should disappear to

5.3 Valve exercise function

This function is performed if the thermostatic
head doesn't move during 2 weeks.
This function doesn't work in OFF mode.
6.

PARAMETERS MENU

Your thermostatic head has parameters menu,
in order to enter in this menu, press and
maintain the ( ) key during 5 seconds. Then
parameters menu will appear and first param-
eter screen will be displayed: Now you can
select a parameter which must be adjusted
with the navigation LEFT (
keys, once the parameter chosen, toggle the
value with the ( ) key, modify it with LESS (
) or MORE ( ) and confirm your adjustment
with ( ) Key.
To leave the parameter menu, choose the
parameter End (menu number 21) and press
( ).
N° Default value & other possibilities
10 oooo Thermostatic head initialization
This menu is used for the first time you
install the thermostatic head on the heater.
It helps to completely open or close the
thermostatic head and need to be done
once.
11 rF Radio configuration
Sends the radio link signal in order to
assign this RF Thermostatic head with a
Central Unit.
ENGLISH
EN
) or RIGHT ( )