Bosch JS470E Instrucciones De Funcionamiento Y Seguridad página 11

Dust Extraction
(Not included, sold
separately)
The JS1007 Dust Extraction Kit includes
a dust shroud and an extraction tube for
connecting the jig saw to a vacuum hose
or vacuum hose adapter.
Note: The dust shroud must be used
when the extraction tube is connected
to a vacuum cleaner system.
To use this feature, attach extraction
tube to footplate. When inserting the
extraction tube into the footplate be sure
that the plastic post of the extraction
tube engages into the corresponding
hole on the housing (Fig. 3).
For vacuuming, a Bosch vacuum hose or
hose adapter (optional accessory) can
be directly connected to the extraction
tube (Fig. 3).
For maximum vacuum dust pick up, dust
shroud must be attached.
Fig. 4
1
Assembly
2
NON-MARRING
OVERSHOE
-11-
Attaching Overshoe
Your tool is equipped with a protective
plastic overshoe that protects finer
surfaces.
To attach, hook overshoe over front of
metal footplate and snap into place at
rear of footplate (Fig. 4).
Anti-Splinter Insert
To minimize splintering of the top
surface of the material being cut, place
the JA1013 anti-splinter insert in the
blade opening of the footplate (Fig. 5).
Note: This insert will only work with
blades that have ground sides such as
T301CD, T101B, T101D, and T101DP.
Note: When the insert is used with the
non-marring overshoe, the anti-splinter
insert has to be placed in overshoe.
Fig. 5
JA1013
ANTI-SPLINTER
INSERT
FOOTPLATE