Microphotography; Use Of C-Mount Camera; Use Of Reflex Cameras - Optika B-380 Serie Manual De Instrucciones

12. Microphotography

12.1

Use of C-mount camera

1. Loosen the clamping screw ① on the trinocular
port and remove the dust cap②. (Fig. 36)
2. Screw the C-mount adapter ③ to the camera ④
and insert the round dovetail of the C-mount into
the empty hole of the trinocular port, then tighten
the clamping screw ①. (Fig. 37)
12.2 Use of Reflex cameras
1. Insert the Reflex adapter ② into the relay tube to
the microscope ①.
2. Screw the "T2" ring ③ (not provided) to the reflex
adapter.
3. Connect the Reflex camera ④ to the "T2" ring just
installed. (Fig. 38)
4. Mount the other end of the relay tube ① into the
empty hole of the trinocular port, then tighten the
clamping screw. (Fig. 36)
• "T2" ring is not provided along with the microsco-
pe, but is commercialy available.
• While shooting dark specimens, darken eyepie-
ces and viewfinder with a dark cloth to miminize
the diffused light.
• To calculate the magnification of the camera:
objective magnification * camera magnification *
lens magnification.
• If using an SLR camera, mirror move-
ment may cause the camera to vibrate.
We suggest lifting the mirror, using long ex-
posure times and a remote cord.
Page 23
③
④
③
②
②
①
Fig. 36
④
Fig. 37
①
Fig. 38