Changing A Parameter; Exiting The Program Mode - Saeco Office One Instrucciones Para El Uso

Installation of the machine - Service Provider Manual
11.5

Changing a parameter

All editable parameters can be very easily changed.
When the page containing the value you wish to change is displayed, press
"OK".
1.2.1.
Std Temperature
Warning! When you change a machine operating parameter, you
should be aware that you are changing an operating parameter set
by the manufacturer for the purpose of ensuring optimal machine per-
formance.
The value will become editable and the " "symbol will appear beneath the digit
to be changed.
1.2.1.
Std Temperature
Press one of the two keys to change the value.
When the required value is displayed, press "OK".
1.2.1.
Std Temperature
The value will be memorised and the next digit will become available for edit-
ing.
Change the value of the next digit, if necessary, using the " " o " " key.
When the required value is displayed, press "OK".
• 46 •
LANGUAGE
100
LANGUAGE
100
LANGUAGE
100
The value will be memorised and the next digit will become available for edit-
ing.
1.2.1.
Std Temperature
Change the value of the next digit, if necessary, using the " " o " " key.
When the required value is displayed, press "OK".
The " " symbol will disappear and the settings will take effect only when you
exit the program mode.
11.6

Exiting the program mode

To quit the program mode, the following page must be displayed by pressing
"ESC".
3.
Exit
When the message appears on the display, press "OK".
3.
Exit
LANGUAGE
100
LANGUAGE
LANGUAGE