Selecting Frequencies In The Preset Screen - AKG WMS 4000 Modo De Empleo

Ocultar thumbs Ver también para WMS 4000:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 85
• If you prefer not to start a new frequency search, turn the SETUP control CW or CCW. This will bring
up the "EXIT" option:
- Press the SETUP control briefly. The setting will not be saved and the display will revert to the Preset
screen.
1. In SETUP mode, turn the SETUP control CW or CCW to call up this screen:
If, however, you have set the current receiving frequency in the Frequency screen or no Preset has
been saved yet, the following screen will appear in the display:
2. Press the SETUP control briefly. The display will change as follows:
3. Turn the SETUP control CW or CCW to select the desired Preset.
4. Press the SETUP control briefly. The display will change as follows:
5. Turn the SETUP control CW or CCW to select the desired Frequency Group.
6. Press the SETUP control briefly. The display will change as follows:
7. Turn the SETUP control CW or CCW to select the desired frequency as a Subchannel of the selected
Frequency Group.
8. Press the SETUP control briefly. The display will change as follows:
• To save your setting, press the SETUP control briefly. The display will revert to the Preset screen.
• If you'd rather not save your setting, turn the SETUP control CW or CCW. The display will change as
follows:
3 Setting Up
3.8.3 Selecting Frequencies
from the Preset Screen
Refer to section 3.8.4.
31
Tabla de contenido
loading

Este manual también es adecuado para:

Sr 4000

Tabla de contenido