Search Operation Mode - Promax PROFI-70 Manual De Instrucciones

USER'S MANUAL. PROFI-70
IMPORTANT REMARK
With the aim of increasing the meter sensitivity this value can be set between 50
ms and 10.000 ms in steps of 50 ms.
Longer periods of measurement facilitate to receive data from stations with weak
transmission levels or too far away from meter, but they can slow down the
measurement process for SEARCH, SCAN and ANALYSE functions.
To exit the SETUP configuration menu and return to the main menu, press the BACK
option from the lower selection box, or the direct main menu access button [12].

4.2.3 SEARCH operation mode

The SEARCH function allows making a search of all the transmitting stations in
the ISM frequency band.
In the display appears, for each detected station and by this order; the channel in
which it transmits (CH), the name of the station (SSID), the authentication code (MAC),
the symbol ( ) whether the station is encrypted, the power of the received signal
(PWR) and the signal noise ratio (SNR).f
02/2007
Figure 7.- Search funcion.
IMPORTANT
Page 19