Promax PROFI-70 Manual De Instrucciones página 62

The display shows the measurements obtained for the signal coming from the A
or B input selected (see section "4.2.2 CONFIG operation mode"). For example in the
previous figure, for the antenna input (A), it is indicated: channel power (PWR) - 32
dBm, SNR 28 dB, tuning frequency (FR) 2422 MHz corresponding to the channel (CH)
C03.
In this case a station has been detected (Stations:1) identified with SSID:
INTERMEC and MAC: 00:02:2D:3E:82:DB, which emits Beacon signals each 100 ms
and modulated signals (MOD) in OFDM, not encryted (Encrypt: No) through an ad-hoc
type network (MODE: Ad-hoc).
In the low part of the display appears the channel power value as an analogue
bar (PWR).
Page 24
Figure 13.- Measurement functions menu.
USER'S MANUAL. PROFI-70
02/2007